Before and after walk-in cooler box refurb with diamond-plate walls

Walk-in cooler refurbishment (alumafoam box refurbs)

A walk-in that is sweating, peeling, or running all day is not always a candidate for a new box. Left Coast Refrigeration refurbishes commercial walk-in coolers and freezers from our shop in Escondido. The signature job is an alumafoam refurb: we rebuild the box so you get increased R-value and a walk-in that runs without the cost and interruption of a new install. Re-skinning and walk-in cooler wall repair are part of that envelope work — soft or peeling walls often need a re-skin, not a brand-new box.

If the structure is still sound and the problem is the skin, the insulation, the doors, or the floor, a refurb is usually the conversation we start with. Restaurants, grocers, and bars in Southern California call us for that reason — they cannot close the kitchen for a teardown, and they do not want to pay for a new walk-in if the old one can be brought back.

What a box refurb is

A refurb is not a wipe-down and a coat of paint. We tailor the work to the box. Alumafoam is how we increase R-value on a tired walk-in so it holds temperature and the refrigeration system does not have to fight a leaking envelope.

Depending on the unit, a job can include:

  • Alumafoam refurb of the box
  • Door and frame work, including custom doors
  • Gasket replacement so the door actually seals
  • Floor repair or replacement
  • Custom metal work and diamond plate where the box takes abuse
  • Heater wires in frames or floors where frost is killing the seal
  • Strip curtains if the door is open a lot during service

You do not have to buy the whole list. We inspect, tell you what is failing, and price the work that matters.

Walk-in cooler cleaned out and refurbished, ready for stock, Left Coast Refrigeration San Diego County
Walk-in refurb finished: box cleaned out, floor drying, ready for stock.

This is what the end of a walk-in refurb looks like: the box cleaned out, the floor mopped and drying, and the walls ready for shelving and product. Whether the job was a re-skin, a full alumafoam box refurb, or walk-in cooler wall repair on a few soft panels, we hand the walk-in back clean and ready for stock.

Who this is for

  • Restaurants whose walk-in is original to the build-out and is now soft, dented, or inefficient
  • Grocery and liquor rooms that cannot take a multi-day replacement
  • Bars and kitchens that need the box to hold temp through a rush
  • Anyone who has been told they need a new walk-in and wants a second look

A refurb is not magic. If the box is structurally done, we will say so. The point of the free inspection is to find that out before you spend money.

Why it matters in a working kitchen

Walk-ins fail in slow, expensive ways. Cold air leaks at the door. Insulation packs down or gets wet. The compressor runs longer. Product sits closer to the line. Health inspectors notice temperature logs. Energy waste shows up on the utility bill.

We will not invent a percentage you will save. Rebuilding the envelope, sealing the doors, and fixing the floor are the practical ways to stop throwing power at a leaking box. That is the job.

In 2016, Bar Rescue (Season 5, Episode 5, aired September 25, 2016) picked Left Coast Refrigeration to build the custom stainless walk-in door, with a diamond-plate kickplate, for the Forbidden Pub makeover. Watch the episode free on Pluto TV. Most of the refurbs we do are not on television. They are the same kind of box, in a kitchen that has to open tomorrow.

How we work

Work comes out of 1175 Industrial Ave, Suite J, Escondido, CA 92029. We serve San Diego County and Southern California. Call 760-745-5252 during shop hours (Monday–Friday, 8AM–4PM PST), or send photos and a description. Inspections are free.

Related work: custom gaskets, custom doors and frames, walk-in floors, preventive maintenance. If the walk-in will be down, we also rent 12′ and 16′ refrigerated trailers.

Walk-in cooler re-skin / re-skinning and wall repair

A lot of “we need a new walk-in” calls are really walk-in cooler wall repair or a re-skin / re-skinning job. Soft panels, peeling metal, dents that sweat, or a skin that no longer protects the insulation — that is envelope work. Alumafoam box refurbs are how we rebuild tired walls and raise R-value without tearing out the whole box.

Re-skinning a walk-in cooler wall is not cosmetic paint. We address the failed skin and the insulation behind it so the box stops leaking cold. Combined with doors, gaskets, floors, and hardware when needed, a refurb keeps kitchens open instead of waiting on a full replacement.

Do you re-skin walk-in cooler walls?

Yes. Walk-in cooler re-skinning and wall repair are part of our alumafoam refurb work from Escondido. If panels are soft, peeling, or sweating but the structure is still sound, we inspect and tell you whether a re-skin / wall repair refurb is enough — or whether the box is past saving.

Is re-skinning the same as a full walk-in replacement?

No. A re-skin / alumafoam refurb keeps the box in place and rebuilds the envelope. A full replacement tears the walk-in out. We start with the free inspection so you do not pay for a new install when wall repair will do.

Scroll to Top