
Custom metal work for commercial walk-ins
Walk-in boxes take carts, boots, and product to the same spots every day. Left Coast Refrigeration fabricates custom metal work for those spots — from the Escondido shop, to the spec of the box in front of us. The work is for refrigeration environments: function first, then a finish that still looks like a commercial cooler, not a showroom.
Diamond plate is the piece most kitchens ask for. It belongs on high-traffic walls and lower sections of the box where impacts happen. We also build other metal to spec when the job is not a catalog part: kickplates, patches, and fabrication that has to fit an existing walk-in.
This is the same shop that builds custom doors (diamond plate kickplates inside and out, standard) and does box refurbs. Metal work is often part of those jobs. It is also a standalone call when the box is fine and the abuse zone is not.
What we fabricate
- Diamond plate for lower walls and high-traffic areas
- Kickplates and related door metal (see custom doors)
- Other custom metal built to the opening, the wall, or the abuse pattern on site
- Work that has to match an existing cooler or freezer, not a new install drawing

Diamond plate goes where the box takes the hits. On this custom walk-in door we cut the plate to cover the lower section of the slab — the zone carts and boots hit every day — and left the alumafoam skin above it.
We design and fabricate to spec. That means we measure the box you have. Odd corners, old panels, and mixed materials are normal in Southern California kitchens that have been remodeled twice.
Hardware — hinges, handles, door closers — is related but is usually a door job. If you only need hardware, say that. Do not order plate to fix a hinge.
Who this is for
- Restaurants whose walk-in walls are dented at cart height
- Grocery back rooms with pallet traffic along one wall
- Bars and kitchens that already ruined the factory kick
- Operators in the middle of a floor or refurb who want the abuse surfaces done at the same time
Diamond plate will not insulate a leaking box. If the walk-in is sweating or cannot hold temperature, start with the envelope: refurb, gaskets, doors, floors. Use metal work to protect what you just fixed.
Why it is worth doing
A walk-in is a piece of equipment people walk into. The factory skin is not built for that forever. Once the panel is punched, moisture gets in, the corner looks like a health-inspection photo, and you are patching instead of working.
Plate on the lower wall and a real kick on the door are the usual fix. They take the hit. They also make the box look like someone maintains it, which matters when an inspector or a new manager walks in.
We do not sell style packages. If you want plate because the wall is failing, say that. If you want it because the last remodel left the box looking unfinished, that is a valid job too — still built to spec, still installed like it belongs on a cooler.
Get a measurement and a price
Call 760-745-5252, Monday–Friday, 8AM–4PM PST. Photos of the wall or door help. Use the estimate form or email info@leftcoastrefrigeration.com.
Left Coast Refrigeration
1175 Industrial Ave, Suite J, Escondido, CA 92029
